P. Li and T. Chen, Tensile properties and fracture behavior of a powder-thixoformed 2024Al/SiCp composite at elevated temperatures, vol.7, p.408, 2017.

H. J. Kim, J. M. Lee, Y. H. Cho, J. J. Kim, S. H. Kim et al., Effects of processing parameters on the fabrication of in-situ Al/TiC composites by thermally activated combustion reaction process in an aluminium melt using Al-TiO 2 -C powder mixtures, J. Korean Inst. Met. Mater, vol.50, pp.677-684, 2012.

G. Liu, G. J. Zhang, F. Jiang, X. D. Ding, Y. J. Sun et al., Nanostructured high-strength molybdenum alloys with unprecedented tensile ductility, Nat. Mater, vol.12, pp.344-350, 2013.

L. Y. Chen, J. Q. Xu, H. Choi, M. Pozuelo, X. Ma et al., Processing and properties of magnesium containing a dense uniform dispersion of nanoparticles, Nature, vol.528, pp.539-543, 2015.

W. Zhang, Y. Hu, G. Zhang, and Z. Wang, Formation of nanoscale metallic glassy particle reinforced Al-based composite powders by high-energy milling, vol.7, p.425, 2017.

G. Huang, Y. Shen, R. Guo, and W. Guan, Fabrication of tungsten particles reinforced aluminum matrix composites using multi-pass friction stir processing: Evaluation of microstructural, mechanical and electrical behavior, Mater. Sci. Eng. A, vol.674, pp.504-513, 2016.

C. Suryanarayana and N. Al-aqeeli, Mechanically alloyed nanocomposites, Prog. Mater. Sci, vol.58, pp.383-502, 2013.

H. B. Rajan, I. Dinaharan, S. Ramabalan, and E. T. Akinlabi, Influence of friction stir processing on microstructure and properties of AA7075/TiB 2 in situ composite, J. Alloys Compd, vol.657, pp.250-260, 2016.

M. Wang, D. Chen, Z. Chen, Y. Wu, F. Wang et al., Mechanical properties of in-situ TiB 2 /A356 composites, Mater. Sci. Eng. A, vol.590, pp.246-254, 2014.

T. Hong, X. Li, H. Wang, and D. Chen, Influence of solution temperature on microstructure and properties of in-situ TiB 2 /2009 composites, Mater. Sci. Eng. A, vol.634, pp.1-4, 2015.

J. Geng, T. Hong, Y. Ma, M. Wang, D. Chen et al., The solution treatment of in-situ sub-micron TiB 2 /2024 Al composite, Mater. Des, vol.98, pp.186-193, 2016.

R. S. Mishra and Z. Y. Ma, Friction stir welding and processing, Mater. Sci. Eng. R, vol.50, pp.1-78, 2005.

X. G. Chen, M. Da-silva, P. Gougeon, and L. St-georges, Microstructure and mechanical properties of friction stir welded AA6063-B4C metal matrix composites, Mater. Sci. Eng. A, vol.518, pp.174-184, 2009.

Y. Morisada, H. Fujii, T. Nagaoka, and M. Fukusumi, Effect of friction stir processing with SiC particles on microstructure and hardness of AZ31, Mater. Sci. Eng. A, vol.433, pp.50-54, 2006.

S. M. Ma, P. Zhang, G. Ji, Z. Chen, G. A. Sun et al., Microstructure and mechanical properties of friction stir processed Al-Mg-Si alloys dispersion-strengthened by nanosized TiB 2 particles, J. Alloys Compd, vol.616, pp.128-136, 2014.
URL : https://hal.archives-ouvertes.fr/hal-02341815

Z. Du, M. J. Tan, J. F. Guo, G. Bi, and J. Wei, Fabrication of a new Al-Al 2 O 3 -CNTs composite using friction stir processing (FSP), Mater. Sci. Eng. A, vol.667, pp.125-131, 2016.

P. Carlone, A. Astarita, F. Rubino, and N. Pasquino, Microstructural Aspects in FSW and TIG Welding of Cast ZE41AMagnesium Alloy, Metall. Mater. Trans. B, vol.47, pp.1340-1346, 2016.

I. Charit and R. S. Mishra, Low temperature superplasticity in a friction-stir-processed ultrafine grained Al-Zn-Mg-Sc alloy, Acta Mater, vol.53, pp.4211-4223, 2005.

K. A. Hassan, A. F. Norman, D. A. Price, and P. B. Prangnell, Stability of nugget zone grain structures in high strength Al-alloy friction stir welds during solution treatment, Acta Mater, vol.51, pp.1923-1936, 2003.

C. Luo, F. Dong, and L. Guo, Study on Heat Treatment of Aerospace Aluminum Alloy Welded FSW. MATEC Web Conf, vol.114, p.3010, 2017.

M. F. Nikoo, H. Azizi, N. Parvin, and H. Y. Naghibi, The influence of heat treatment on microstructure and wear properties of friction stir welded AA6061-T6/Al 2 O 3 nanocomposite joint at four different traveling speed, J. Manuf, vol.22, pp.90-98, 2016.

M. M. Moradi, H. J. Aval, and R. Jamaati, Effect of pre and post welding heat treatment in SiC-fortified dissimilar AA6061-AA2024 FSW butt joint, J. Manuf. Process, vol.30, pp.97-105, 2017.

G. R. Cui, Z. Y. Ma, and S. X. Li, The origin of non-uniform microstructure and its effects on the mechanical properties of a friction stir processed Al-Mg alloy, Acta Mater, vol.57, pp.5718-5729, 2009.

M. Peel, A. Steuwer, M. Preuss, P. J. Withers, and . Microstructure, mechanical properties and residual stresses as a function of welding speed in aluminium AA5083 friction stir welds, Acta Mater, vol.51, pp.4791-4801, 2003.

C. Rhodes, Fine-grain evolution in friction-stir processed 7050 aluminum, Scr. Mater, vol.48, pp.1451-1455, 2003.

I. Charit and R. S. Mishra, Abnormal grain growth in friction stir processed alloys, Scr. Mater, vol.58, pp.367-371, 2008.

Z. Chen, G. Sun, Y. Wu, M. Mathon, A. Borbely et al., Multi-scale study of microstructure evolution in hot extruded nano-sized TiB 2 particle reinforced aluminum composites, Mater. Des, vol.116, pp.577-590, 2017.
URL : https://hal.archives-ouvertes.fr/hal-02367982

Y. Tang, Z. Chen, A. Borbély, G. Ji, S. Y. Zhong et al., Quantitative study of particle size distribution in an in-situ grown Al-TiB 2 composite by synchrotron X-ray diffraction and electron microscopy, Mater. Charact, vol.102, pp.131-136, 2015.
URL : https://hal.archives-ouvertes.fr/hal-02341354

P. L. Schaffer, D. N. Miller, and A. K. Dahle, Crystallography of engulfed and pushed TiB 2 particles in aluminium, Scr. Mater, vol.57, pp.1129-1132, 2007.

Y. Deng, Z. Yin, and F. Cong, Intermetallic phase evolution of 7050 aluminum alloy during homogenization, Intermetallics, vol.26, pp.114-121, 2012.

C. Mondal and A. K. Mukhopadhyay, On the nature of T(Al 2 Mg 3 Zn 3 ) and S(Al 2 CuMg) phases present in as-cast and annealed 7055 aluminum alloy, Mater. Sci. Eng. A, vol.391, pp.367-376, 2005.

F. Cong, G. Zhao, F. Jiang, N. Tian, and R. Li, Effect of homogenization treatment on microstructure and mechanical properties of DC cast 7X50 aluminum alloy, vol.25, pp.1027-1034, 2015.

X. M. Li and M. J. Starink, Effect of compositional variations on characteristics of coarse intermetallic particles in overaged 7000 aluminium alloys, Mater. Sci. Technol, vol.17, pp.1324-1328, 2001.

Y. Y. Li, L. Kovarik, P. J. Phillips, Y. F. Hsu, W. H. Wang et al., High resolution characterization of the precipitation behavior of an Al-Zn-Mg-Cu alloy, Philos. Mag. Lett, vol.92, pp.166-178, 2012.

J. Q. Su, T. W. Nelson, R. Mishra, and M. Mahoney, Microstructural investigation of friction stir welded 7050-T651 aluminium, Acta Mater, vol.51, pp.713-729, 2003.

Z. Zhang, R. Yang, Y. Guo, G. Chen, Y. Lei et al., Microstructural evolution and mechanical properties of ZrB2/6061Al nanocomposites processed by multi-pass friction stir processing, Mater. Sci. Eng. A, vol.689, pp.411-418, 2017.

T. Prater, Solid-state joining of metal matrix composites: A survey of challenges and potential solutions, Mater. Manuf. Process, vol.26, pp.636-648, 2011.

C. G. Rhodes, M. W. Mahoney, W. H. Bingel, R. A. Spurling, and C. C. Bampton, Effects of friction stir welding on microstructure of 7075 aluminum, Scr. Mater, vol.36, pp.69-75, 1997.

H. Li, F. Cao, S. Guo, Z. Ning, Z. Liu et al., Microstructures and properties evolution of spray-deposited Al-Zn-Mg-Cu-Zr alloys with scandium addition, J. Alloys Compd, vol.691, pp.482-488, 2017.

L. B. Johannes and R. S. Mishra, Multiple passes of friction stir processing for the creation of superplastic 7075 aluminum, Mater. Sci. Eng. A, vol.464, pp.255-260, 2007.

Z. Y. Ma, A. L. Pilchak, M. C. Juhas, and J. C. Williams, Microstructural refinement and property enhancement of cast light alloys via friction stir processing, Scr. Mater, vol.58, pp.361-366, 2008.

T. R. Mcnelley, S. Swaminathan, and J. Q. Su, Recrystallization mechanisms during friction stir welding/processing of aluminum alloys, Scr. Mater, vol.58, pp.349-354, 2008.

A. Shafiei-zarghani, S. F. Kashani-bozorg, and A. Zarei-hanzaki, Microstructures and mechanical properties of Al/Al 2 O 3 surface nano-composite layer produced by friction stir processing, Mater. Sci. Eng. A, vol.500, pp.84-91, 2009.

Z. Y. Ma, R. S. Mishra, and F. C. Liu, Superplastic behavior of micro-regions in two-pass friction stir processed 7075Al alloy, Mater. Sci. Eng. A, vol.505, pp.70-78, 2009.

P. Lang, E. Povoden-karadeniz, A. Falahati, and E. Kozeschnik, Simulation of the effect of composition on the precipitation in 6xxx Al alloys during continuous-heating DSC, J. Alloys Compd, vol.612, pp.443-449, 2014.

A. Rollett, F. Humphreys, G. S. Rohrer, and M. Hatherly, Recrystallization and Related Annealing Phenomena, pp.248-249, 2004.

Z. Chen, J. Li, A. Borbely, G. Ji, S. Y. Zhong et al., The effects of nanosized particles on microstructural evolution of an in-situ TiB 2 /6063Al composite produced by friction stir processing, Mater. Des, vol.88, pp.999-1007, 2015.
URL : https://hal.archives-ouvertes.fr/emse-01500450

J. Mackenzie, Second paper on statistics associated with the random disorientation of cubes, Biometrika, vol.45, pp.229-240, 1958.

F. C. Liu and Z. Y. Ma, Contribution of grain boundary sliding in low-temperature superplasticity of ultrafine-grained aluminum alloys, Scr. Mater, vol.62, pp.125-128, 2010.

M. Mahoney, C. Rhodes, J. Flintoff, W. Bingel, and R. Spurling, Properties of friction-stir-welded 7075 T651 aluminum, Metall. Mater. Trans. A, vol.29, pp.1955-1964, 1998.

I. Charit, R. S. Mishra, and M. W. Mahoney, Multi-sheet structures in 7475 aluminum by friction stir welding in concert with post-weld superplastic forming, Scr. Mater, vol.47, pp.631-636, 2002.

F. Humphreys, A unified theory of recovery, recrystallization and grain growth, based on the stability and growth of cellular microstructures-II. The effect of second-phase particles, Acta Mater, vol.45, pp.5031-5039, 1997.

S. Cheng, Y. H. Zhao, Y. T. Zhu, and E. Ma, Optimizing the strength and ductility of fine structured 2024 Al alloy by nano-precipitation, Acta Mater, vol.55, pp.5822-5832, 2007.

M. Barmouz, M. K. Givi, and J. Seyfi, On the role of processing parameters in producing Cu/SiC metal matrix composites via friction stir processing: Investigating microstructure, microhardness, wear and tensile behavior, Mater. Charact, vol.62, pp.108-117, 2011.

J. Guo, H. Chen, C. Sun, G. Bi, Z. Sun et al., Friction stir welding of dissimilar materials between AA6061 and AA7075 Al alloys effects of process parameters, Mater. Des, vol.56, pp.185-192, 2014.