L. Shumao, R. Jie, Y. Hua, Y. Tao, and Y. Weizhong, Influence of ammonium polyphosphate on the flame retardancy and mechanical propreties of ramie fiber-reinforced poly(lactic acid) biocomposites, Polym. Int, vol.59, pp.242-248, 2010.

T. Yu, J. Ren, S. Li, H. Yuan, and Y. Li, Effect of fiber surface-treatments on the properties of poly(lactic acid)/ramie composites, Compos. Part A Appl. Sci. Manuf, vol.41, pp.499-505, 2010.

R. M. Rasal, A. V. Janorkar, and D. E. Hirt, Poly(lactic acid) modifications, Prog. Polym. Sci, vol.35, pp.338-356, 2010.

T. Iwata, Biodegradable and Bio-Based Polymers: Future Prospects of Eco-Friendly Plastics, Angew. Chem. Int. Ed, vol.54, pp.3210-3215, 2015.

R. Jain, B. K. Johnson, and H. L. Hess, Performance of line protection and supervisory elements for doubly fed wind turbines, Proceedings of the 2015 IEEE Power & Energy Society General Meeting, vol.24, p.4123, 2015.

S. Solarski, M. Ferreira, and E. Devaux, Characterization of the thermal properties of PLA fibers by modulated differential scanning calorimetry, Polymer, vol.46, pp.11187-11192, 2005.

Y. Tokiwa and B. P. Calabia, Biodegradability and biodegradation of poly(lactide), Appl. Microbiol. Biotechnol, vol.72, pp.244-251, 2006.

M. Brzezi?ski, M. Socka, and B. Kost, Microfluidics for producing polylactide nanoparticles and microparticles and their drug delivery application, Polym. Int, vol.68, pp.997-1014, 2019.

F. S. Senatov, K. V. Niaza, A. A. Stepashkin, and S. D. Kaloshkin, Low-cycle fatigue behavior of 3d-printed PLA-based porous scaffolds, Compos. Part B Eng, vol.97, pp.193-200, 2016.

X. Qi, Y. Ren, and X. Wang, New advances in the biodegradation of Poly(lactic) acid, Int. Biodeterior. Biodegrad, vol.117, pp.215-223, 2017.

Y. Jiang, P. Yan, Y. Wang, C. Zhou, and J. Lei, Form-stable phase change materials with enhanced thermal stability and fire resistance via the incorporation of phosphorus and silicon, Mater. Des, vol.160, pp.763-771, 2018.

L. Zhang, Z. Li, Y. Pan, A. P. Yáñez, S. Hu et al., Polydopamine induced natural fiber surface functionalization: A way towards flame retardancy of flax/poly(lactic acid) biocomposites, Compos. Part B Eng, vol.154, pp.56-63, 2018.

J. Zhang and X. Sun, Mechanical Properties of Poly(lactic acid)/Starch Composites Compatibilized by Maleic Anhydride, Biomacromolecules, vol.5, pp.1446-1451, 2004.

B. Li and M. Yang, Improvement of thermal and mechanical properties of poly(L-lactic acid) with 4,4-methylene diphenyl diisocyanate, Polym. Adv. Technol, vol.17, pp.439-443, 2006.

D. Garlotta, A Literature Review of Poly(Lactic Acid), J. Polym. Environ, vol.9, pp.63-84, 2001.

F. Carrasco, P. Pagès, J. Gámez-pérez, O. O. Santana, and M. L. Maspoch, Processing of poly(lactic acid): Characterization of chemical structure, thermal stability and mechanical properties, Polym. Degrad. Stab, vol.95, pp.116-125, 2010.

J. Wang, Q. Ren, W. Zheng, and W. Zhai, Improved Flame-Retardant Properties of Poly(lactic acid) Foams Using Starch as a Natural Charring Agent, Ind. Eng. Chem. Res, vol.53, pp.1422-1430, 2014.

K. Zhang, Z. An, D. Cai, Z. Guo, and J. Xiao, Key Role of Desert-Oasis Transitional Area in Avoiding Oasis Land Degradation from Aeolian Desertification in Dunhuang, Northwest China. Land Degrad, vol.28, pp.142-150, 2017.

J. Y. Jang, T. K. Jeong, H. J. Oh, J. R. Youn, and Y. S. Song, Thermal stability and flammability of coconut fiber reinforced poly(lactic acid) composites, Compos. Part B Eng, vol.43, pp.2434-2438, 2012.

S. Li, H. Yuan, T. Yu, W. Yuan, and J. Ren, Flame-retardancy and anti-dripping effects of intumescent flame retardant incorporating montmorillonite on poly(lactic acid), Polym. Adv. Technol, vol.20, pp.1114-1120, 2009.

S. Duquesne, S. Magnet, C. Jama, and R. Delobel, Intumescent paints: Fire protective coatings for metallic substrates, Surf. Coat. Technol, pp.302-307, 2004.

M. Gao, W. Wu, and Y. Yan, Thermal degradation and flame retardancy of epoxy resins containing intumescent flame retardant, J. Therm. Anal. Calorim, vol.95, pp.605-608, 2009.

M. Gao and S. Yang, A novel intumescent flame-retardant epoxy resins system, J. Appl. Polym. Sci, vol.115, pp.2346-2351, 2010.

S. Nie, L. Song, Y. Guo, K. Wu, W. Xing et al., Intumescent Flame Retardation of Starch Containing Polypropylene Semibiocomposites: Flame Retardancy and Thermal Degradation, Ind. Eng. Chem. Res, vol.48, pp.10751-10758, 2009.

B. Li and M. Xu, Effect of a novel charring-foaming agent on flame retardancy and thermal degradation of intumescent flame retardant polypropylene, Polym. Degrad. Stab, vol.91, pp.1380-1386, 2006.

X. Wang, Y. Hu, L. Song, S. Xuan, W. Xing et al., Flame retardancy and thermal degradation of intumescent flame retardant poly(lactic acid)/starch biocomposites, Ind. Eng. Chem. Res, vol.50, pp.713-720, 2011.

S. Bourbigot, M. Le-bras, S. Duquesne, and M. Rochery, Recent Advances for Intumescent Polymers, Macromol. Mater. Eng, vol.289, pp.499-511, 2004.

X. Almeras, M. Le-bras, P. Hornsby, S. Bourbigot, G. Marosi et al., Effect of fillers on the fire retardancy of intumescent polypropylene compounds, Polym. Degrad. Stab, vol.82, pp.325-331, 2003.

X. Almeras, M. Le-bras, F. Poutch, S. Bourbigot, G. Marosi et al., Effect of fillers on fire retardancy of intumescent polypropylene blends, Macromol. Symp, vol.198, pp.435-448, 2003.

C. Réti, M. Casetta, S. Duquesne, S. Bourbigot, and R. Delobel, Flammability properties of intumescent PLA including starch and lignin, Polym. Adv. Technol, vol.19, pp.628-635, 2008.

S. Bourbigot, M. Le-bras, R. Delobel, R. Decressain, and J. Amoureux, Synergistic effect of zeolite in an intumescence process: Study of the carbonaceous structures using solid-state NMR, J. Chem. Soc. Faraday Trans, vol.92, pp.149-158, 1996.

L. Bras, M. Bourbigot, S. Le-tallec, Y. Laureyns, and J. , Synergy in intumescence-Application to ?-cyclodextrin carbonisation agent in intumescent additives for fire retardant polyethylene formulations, Polym. Degrad. Stab, vol.56, pp.11-21, 1997.

K. Lim, S. Bee, L. T. Sin, T. Tee, C. T. Ratnam et al., A review of application of ammonium polyphosphate as intumescent flame retardant in thermoplastic composites, Compos. Part B Eng, vol.84, pp.155-174, 2016.

J. Wang, D. Wang, Y. Liu, X. Ge, and Y. Wang, Polyamide-enhanced flame retardancy of ammonium polyphosphate on epoxy resin, J. Appl. Polym. Sci, vol.108, pp.2644-2653, 2008.

R. Li, C. Deng, C. Deng, L. Dong, H. Di et al., An efficient method to improve simultaneously the water resistance, flame retardancy and mechanical properties of POE intumescent flame-retardant systems, RSC Adv, vol.5, pp.16328-16339, 2015.

M. Chen, Y. Lin, X. Wang, L. Zhong, Q. Li et al., Influence of Cuprous Oxide on Enhancing the Flame Retardancy and Smoke Suppression of Epoxy Resins Containing Microencapsulated Ammonium Polyphosphate, Ind. Eng. Chem. Res, vol.54, pp.12705-12713, 2015.

Y. Yang, Y. Xue, Y. Yu, N. Ma, and Y. Shao, Experimental study on flexural performance of partially precast steel reinforced concrete beams, J. Constr. Steel Res, vol.133, pp.192-201, 2017.

L. Liu, Y. Zhang, L. Li, and Z. Wang, Microencapsulated ammonium polyphosphate with epoxy resin shell: Preparation, characterization, and application in EP system, Polym. Adv. Technol, vol.22, pp.2403-2408, 2011.

X. Chen and C. Jiao, Study on flame retardance of co-microencapsulated ammonium polyphosphate and pentaerythritol in polypropylene, J. Fire Sci, vol.28, pp.509-521, 2010.

L. Yang, W. Cheng, J. Zhou, H. Li, X. Wang et al., Effects of microencapsulated APP-II on the microstructure and flame retardancy of PP/APP-II/PER composites, Polym. Degrad. Stab, vol.105, pp.150-159, 2014.

B. Wang, X. Qian, Y. Shi, B. Yu, N. Hong et al., Cyclodextrin microencapsulated ammonium polyphosphate: Preparation and its performance on the thermal, flame retardancy and mechanical properties of ethylene vinyl acetate copolymer, Compos. Part B Eng, vol.69, pp.22-30, 2015.

X. Shi, Y. Ju, M. Zhang, and X. Wang, The intumescent flame-retardant biocomposites of poly(lactic acid) containing surface-coated ammonium polyphosphate and distiller's dried grains with solubles (DDGS), Fire Mater, vol.42, pp.190-197, 2018.

G. Ran, X. Liu, J. Guo, J. Sun, H. Li et al., Improving the flame retardancy and water resistance of polylactic acid by introducing polyborosiloxane microencapsulated ammonium polyphosphate, Compos. Part B Eng, vol.173, p.106772, 2019.

S. Bourbigot, S. Duquesne, G. Fontaine, S. Bellayer, T. Turf et al., Characterization and reaction to fire of polymer nanocomposites with and without conventional flame retardants, Mol. Cryst. Liq. Cryst, vol.486, 2008.

B. Bodzay, K. Bocz, Z. Bárkai, and G. Marosi, Influence of rheological additives on char formation and fire resistance of intumescent coatings, Polym. Degrad. Stab, vol.96, pp.355-362, 2011.

E. W. Fischer, H. J. Sterzel, and G. Wegner, Investigation of the structure of solution grown crystals of lactide copolymers by means of chemical reactions, Kolloid-Z. Z. Für Polym, vol.251, pp.980-990, 1973.

G. G. Fontaine and S. Bourbigot, Intumescent Polylactide: A Nonflammable Material, J. Appl. Polym. Sci, vol.113, pp.3860-3865, 2009.

A. Kowalski, A. Duda, and S. Penczek, Polymerization of L,L-Lactide Initiated by Aluminum Isopropoxide Trimer or Tetramer, Macromolecules, vol.31, pp.2114-2122, 1998.