F. Sharifi and A. C. Sooriyarachchi, Fiber based approaches as medicine delivery systems, ACS Biomater. Sci. Eng, vol.2, pp.1411-1431, 2016.

E. S. Place and J. H. George, Synthetic polymer scaffolds for tissue engineering, Chem. Soc. Rev, vol.38, pp.1139-1151, 2009.

R. Vasita and D. S. Katti, Nanofibers and their applications in tissue engineering, Int. J. Nanomed, vol.1, pp.15-30, 2006.

E. Scholten and L. Bromberg, Electrospun polyurethane fibers for absorption of volatile organic compounds from air, ACS Appl. Mater. Interfaces, vol.3, pp.3902-3909, 2011.

A. A. Chaaya and M. Bechelany, ZnO 1D nanostructures designed by combining atomic layer deposition and electrospinning for UV sensor applications, J. Mater. Chem. A, vol.2, pp.20650-20658, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01688580

J. Chen and X. Huang, Cellulose nanofiber supported 3D interconnected BN nanosheets for epoxy nanocomposites with ultra high thermal management capability, Adv. Funct. Mater, vol.27, p.1604754, 2017.

A. Yang and L. Cai, Thermal management in nanofiber-based face mask, Nano Lett, vol.17, pp.3506-3510, 2017.

G. Zhao and B. Huang, Electrospun poly (L-Lactic Acid) nanofibers for nanogenerator and diagnostic sensor applications, Macromol. Mater. Eng, p.302, 2017.

Y. Liu and J. Goebl, Templated synthesis of nanostructured materials, Chem. Soc. Rev, vol.42, pp.2610-2653, 2013.

M. Chi and Y. M. Zhao, The synthesis of PrB6 nanowires and nanotubes by the self-catalyzed method, Ceram. Int, vol.40, pp.8921-8924, 2014.

H. S. Liao and J. Lin, Self-assembly mechanisms of nanofibers from peptide amphiphiles in solution and on substrate surfaces, Nanoscale, vol.8, pp.14814-14820, 2016.

R. T. Weitz and L. Harnau, Polymer nanofibers via nozzle-free centrifugal spinning, Nano Lett, vol.8, pp.1187-1191, 2008.

A. Carlos, I. Olivas-armendariz, and J. S. Castro-carmona, Scaffolds for tissue engineering via thermally induced phase separation, Adv. Regen. Med, pp.275-294, 2011.

Y. Chen and W. Lu, Synthesis, characterization and photocatalytic activity of nanocrystalline first transitionmetal, Appl. Sci, vol.9, issue.8, 2018.

S. Thakkar and M. Misra, Electrospun polymeric nanofibers: New horizons in drug delivery, Eur. J. Pharm. Sci, vol.107, pp.255-262, 2017.

Z. M. Huang and Y. Z. Zhang, A review on polymer nanofibers by electrospinning and their applications in nanocomposites, Compos. Sci. Technol, vol.63, pp.2223-2253, 2003.

S. Jayaraman and V. Aravindan, Synthesis of porous LiMn2O4 hollow nanofibers by electrospinning with extraordinary lithium storage properties, Chem. Commun, vol.49, pp.6677-6679, 2013.

Z. Sun and E. Zussman, Compound core-shell polymer nanofibers by co-electrospinning, Adv. Mater, vol.15, pp.1929-1932, 2003.

Y. Srivastava and I. G. Loscertales, Electrospinning of hollow and core/sheath nanofibers using a microfluidic manifold, Microfluid. Nanofluidics, vol.4, pp.245-250, 2008.

S. M. Park and H. Kim, Ultra-thin, aligned, free-standing nanofiber membranes to recapitulate multi-layered blood vessel/tissue interface for leukocyte infiltration study, Biomaterials, vol.169, pp.22-34, 2018.

B. Gupta and N. Revagade, Poly (lactic acid) fiber: An overview, Prog. Polym. Sci, vol.32, pp.455-482, 2007.

S. Farah and D. Anderson, Physical and mechanical properties of PLA, and their functions in widespread applications, Adv. Drug. Deliver. Rev, vol.107, pp.367-392, 2016.

B. Barua and C. Mrinal, Influence of humidity, temperature, and annealing on micro structure and tensile properties of electrospun polyacrylonitrile nanofibers, Polym. Eng. Sci, vol.58, pp.998-1009, 2017.

Y. Tong and Z. Jiang, Effect of annealing on the morphology and properties of ZnS: Mn nanoparticles/PVP nanofibers, Mater. Lett, vol.62, pp.3385-3387, 2008.

S. Inukai and N. Kurokawa, Annealing and saponification of electrospun cellulose-acetate nanofibers used as reinforcement materials for composites, Compos. Part. A Appl. Sci. Manuf, vol.113, pp.158-165, 2018.

M. Baniasadi and Z. Xu, Correlation of annealing temperature, morphology, and electro-mechanical properties of electrospun piezoelectric nanofibers, vol.127, pp.192-202, 2017.

B. Pittenger and N. Erina, Quantitative mechanical property mapping at the nanoscale with PeakForce QNM, Appl. Note Veeco Instrum. Inc, vol.2010, pp.1-12

D. Platz and E. A. Tholen, Intermodulation atomic force microscopy, Appl. Phys. Lett, p.153106, 2008.

E. Cobani and I. Tagliaro, Hybrid interface in sepiolite rubber nanocomposites: Role of self-assembled nanostructure in controlling dissipative phenomena, Nanomaterials, vol.9, p.486, 2019.

L. T. Haan and J. T. Willigers, Contacless control of local surface buckling in photoaligned gold/liquid crystal polymer bilayers, Langmuir, vol.34, pp.10543-10549, 2018.

S. Jesse and H. N. Lee, Quantitative mapping of switching behavior in piezoresponse force microscopy, Rev. Sci. Instrum, vol.77, p.73702, 2006.

A. Gruverman and M. Alexe, Piezoresponse force microscopy and nanoferroic phenomena, Nat. Commun, vol.10, p.1661, 2019.

V. Sencadas and C. Ribeiro, Local piezoelectric activity of single poly(L-lactic acid) microfibers. Appl. Phys. A, vol.109, pp.51-55, 2012.

A. Sultana and S. K. Ghosh, Human skin interactive sef-powered wearable piezoelectric bio-e-skin by electrospun poly-L-lactic acid nanofibers for non-invasive physiological signal monitoring, J. Mater. Chem. B, vol.5, pp.7352-7359, 2017.

M. S. Righetti, M. Gazzano, and M. Laura-di-lorenzo, Enthalpy of melting of ?'-and ?-crystal of poly (L-lactic acid), Eur. Polym. J, vol.70, pp.215-220, 2015.

B. J. Rodriguez, . S. Callahan, and . Kalinin;-r.;-proksch, Dual-frequency resonance-tracking atomic force microscopy, Nanotechnology, vol.18, p.475504, 2007.

G. Kister and G. Cassanas, Vibrational analysis of poly (L-lactic acid), J. Raman Spectrosc, vol.26, pp.307-311, 1995.

K. Aou and S. L. Hsu, Trichroic vibrational analysis on the ?-form of poly (lactic acid) crystals using highly oriented fibers and spherulites, Macromolecules, vol.39, pp.3337-3344, 2006.

P. J. Kalish and K. Aou, Spectroscopy and thermal analyses of ?' and ? crystalline forms of poly (L-lactic acid), Polymer, vol.52, pp.814-821, 2011.

J. Zhang and Y. Duan, Crystal modifications and thermal behavior of poly (L-lactic acid) revealed by Infrared Spectroscopy, Macromolecules, vol.38, pp.8012-8021, 2005.

T. Kawai and N. Rahman, Crystallization and melting behavior of poly (L-lactic acid), Macromolecules, vol.40, pp.9463-9469, 2007.

M. Bognitzki and W. Czado, Nanostructured fibers via electrospinning, Adv. Mater, vol.13, pp.70-72, 2001.

S. P. Tan and C. T. Lim, Effects of annealing on the structural and mechanical properties of electrospun polymeric nanofibres, Nanotechnology, vol.17, pp.2649-2654, 2006.

B. R. Neugirg and S. R. Koebley, AFM-based mechanical characterization of single nanofibres, Nanoscale, vol.8, pp.8414-8426, 2016.

H. Hertz, On the contact of elastic solids, J. Reine Angew. Math, vol.1881, pp.156-171

B. V. Derjaguin, V. M. Muller, and Y. P. Toporov, Effect of contact deformations on the adhesion of particles, J. Colloid Interface Sci, vol.53, pp.314-326, 1975.

K. L. Johnson, K. Kendall, and A. D. Roberts, Surface energy and contact of elastic solids, Proc. Royal Soc. London Ser. A Math. Phys. Sci, vol.324, pp.301-313, 1971.

D. J. Maugis, Adhesion of spheres: The JKR-DMT transition using a Dugdale model, J. Colloid Interface Sci, vol.150, p.243, 1992.

N. Wang, R. Barfoot, and M. F. Butler, The effect of surface treatments on the nanomechanical properties of human hair, ACS Biomater. Sci. Eng, vol.4, pp.3063-3071, 2018.

F. Crippa, P. Thoren, and F. Daniel, Probing nano-scale viscoelastic response in air and in liquid with dynamic atomic force microscopy, Soft Matter, vol.14, pp.3998-4006, 2018.

S. C. Wong, A. Baji, and S. Leng, Effect of fiber diameter on tensile properties of electrospun poly (?caprolactone), Polymer, vol.49, pp.4713-4722, 2008.

A. Morel, S. Domaschke, and V. U. Kumaran, Correlating diameter, mechanical and structural properties of poly (L-lactide) fibres from needleless electrospinning, Acta Biomater, vol.81, pp.169-183, 2018.

A. Morel, S. C. Oberle, and S. Ulrich, Revealing non-crystalline polymer superstructures within electrospun fibers through solvent-induced phase rearrangements, Nanoscale, vol.11, pp.16788-16800, 2019.

J. S. Harrison and . Ounaies, Z. Encyclopedia of Polymer Science and Technology, 2002.

A. Gruverman, A. Kholkin, A. Kingon, and H. Tokumoto, Asymmetric nanoscale switching in ferroelectric thin films by scanning force microscopy, Appl. Phys. Lett, vol.78, pp.2751-2753, 2001.

A. Ferri, S. Saitzek, A. Da-costa, R. Desfeux, G. Leclerc et al., Thickness dependence of the nanoscale piezoelectric properties measured by piezoresponse force microscopy on (111)-oriented PLZT 10/40/60 thin films, Surf. Sci, vol.602, 1987.
URL : https://hal.archives-ouvertes.fr/hal-01681478

K. Wasanasuk and K. Tashiro, Crystal structure analysis of poly (L-lactic Acid) ? form on the basis of the 2-dimensional wide-angle synchrotron X-ray and neutron diffraction measurements, © 2020 by the authors. Licensee MDPI, vol.44, pp.6441-6452, 2011.