Accéder directement au contenu Accéder directement à la navigation

Intumescent Polymer Metal Laminates for Fire Protection

Abstract : Intumescent paints are applied on materials to protect them against fire, but the development of novel chemistries has reached some limits. Recently, the concept of “Polymer Metal Laminates,” consisting of alternating thin aluminum foils and thin epoxy resin layers has been proven efficient against fire, due to the delamination between layers during burning. In this paper, both concepts were considered to design “Intumescent Polymer Metal Laminates” (IPML), i.e., successive thin layers of aluminum foils and intumescent coatings. Three different intumescent coatings were selected to prepare ten-plies IPML glued onto steel substrates. The IPMLs were characterized using optical microscopy, and their efficiency towards fire was evaluated using a burn-through test. Thermal profiles obtained were compared to those obtained for a monolayer of intumescent paint. For two of three coatings, the use of IPML revealed a clear improvement at the beginning of the test, with the slopes of the curves being dramatically decreased. Characterizations (expansion measurements, microscopic analyses, in situ temperature, and thermal measurements) were carried out on the different samples. It is suggested that the polymer metal laminates (PML) design, delays the carbonization of the residue. This work highlighted that design is as important as the chemistry of the formulation, to obtain an effective fire barrier.
Type de document :
Article dans une revue
Liste complète des métadonnées

Littérature citée [20 références]  Voir  Masquer  Télécharger

https://hal.univ-lille.fr/hal-01890498
Contributeur : Lilloa Université de Lille <>
Soumis le : mardi 1 octobre 2019 - 14:34:37
Dernière modification le : mardi 17 mars 2020 - 02:12:18

Fichier

Polymers 2018 -Intumescent Pol...
Fichiers éditeurs autorisés sur une archive ouverte

Licence


Distributed under a Creative Commons Paternité 4.0 International License

Identifiants

Collections

Citation

Laura Geoffroy, Fabienne Samyn, Maude Jimenez, Serge Bourbigot. Intumescent Polymer Metal Laminates for Fire Protection. Polymers, MDPI, 2018, 10 (9), pp.995. ⟨10.3390/polym10090995⟩. ⟨hal-01890498v3⟩

Partager

Métriques

Consultations de la notice

52

Téléchargements de fichiers

68